Camp Snap Charging and Battery Guide
Apr 27, 2025
If you’ve just picked up a Camp Snap camera, you’re probably excited to start snapping photos with its fun, retro vibe. But before you head out on your adventures, it’s important to know how to charge your Camp Snap, understand its battery life, and learn a few tips for keeping it powered up. In this guide, I'll cover everything you need to know about charging the Camp Snap camera, how long it takes to charge, how to tell when it's fully charged, and what to do if you ever need a battery replacement.
What This Guide Covers
In this guide, you'll learn:
How to Check the Battery Level
Checking the battery level on your Camp Snap is easy. When you switch on the camera using the On/Off/Flash selector at the back, the battery level will briefly appear on the small display screen.
The battery percentage is shown as a number — 100, 90, 80, 70, and so on. It stays visible for about 3 to 5 seconds after powering on, giving you a quick snapshot of how much charge you have left before you start shooting.
The Camp Snap battery is officially rated by the manufacturer for up to 500 photos per charge. However, in real-world use, most users find it lasts closer to 200 to 300 photos, depending on how often you turn the camera on and off and how much you use the flash. Keeping an eye on the battery level before heading out ensures you won’t miss any great shots!
How to Charge the Camp Snap Camera Properly
Charging your Camp Snap camera is simple:
Find the Charging Port:
The charging port is located on the bottom of the camera, covered by a small rubber flap with a USB symbol on it. Gently lift the flap to reveal the connection.
Use a USB-C Cable:
The Camp Snap uses a USB-C connector for both charging and image transfer. You can use the USB-C to USB-C cable included with the camera, or any good-quality fast-charging USB-C cable. It's also a good idea to carry a backup cable, like the Anker USB-C to USB-C Cable (Here), known for its durability and fast, safe charging.
Connect to a Power Source:
Plug one end of the USB-C cable into the camera and the other end into:
-
A computer USB-C port, or
-
A wall charger with a USB-C outlet.
Monitor Charging Indicators:
Once connected:
-
The display will show a flashing "Chg" message.
-
The small indicator light near the port will turn red.
Know When Charging Is Complete:
When the Camp Snap is fully charged:
-
The "Chg" message will stop flashing and stay solid.
-
The indicator light will turn green.
Confirm Full Charge:
After unplugging the camera and turning it on, the battery level will briefly show "100" on the display.
Note:
You don’t need to switch the Camp Snap on to charge it. Simply plug it into a power source while it's off, and charging will begin automatically.
How Long Does It Take to Charge the Camp Snap Camera?
The Camp Snap camera typically charges from 0% to 100% in about 1 to 1.5 hours. It’s quick and convenient to top up the battery before a day of shooting.
Charging time can vary depending on the cable and power adapter you use:
-
Using a USB wall charger is the fastest and most reliable method.
-
Charging from a computer or low-power source usually takes longer.
For best results, use a trusted brand wall charger (such as Anker, Belkin, Samsung, or Apple) that provides 5V output and at least 1A or 2A current.
Avoid using fast chargers designed for smartphones, as they may deliver too much power and potentially shorten your Camp Snap’s battery life.
Choosing a good-quality charger helps maintain your camera’s performance and ensures safe, consistent charging.
📌 Tip: A great option is the Belkin 20W USB-C Wall Charger (Here), which features dynamic power adjustment. This means it automatically detects and safely adjusts the charging output for different devices — including low-power gadgets like the Camp Snap camera — ensuring optimal and safe charging every time.
How to Tell When the Battery Is Fully Charged
You can easily tell when your Camp Snap camera is fully charged:
-
The display will stop flashing and show a steady "Chg" message.
-
The small indicator light next to the charging port will turn green.
If you plug in the Camp Snap when the battery is already full, the display will show "FULL" instead of "Chg."
Once you see the steady "Chg" message or "FULL," your Camp Snap is ready to go!
How to Maximise Camp Snap Battery Life
Taking care of your Camp Snap’s battery keeps it performing better for longer. Here’s how to get the most out of it:
Long-Term Battery Care Tips:
-
Use a quality charger: Stick to trusted brands and avoid cheap fast chargers.
-
Avoid extreme temperatures: Don’t leave the camera in very hot or cold places.
-
Don't let the battery drain to 0% all the time: Recharge when it drops to around 20–30%.
-
Unplug once charged: Disconnect once fully charged to avoid unnecessary battery stress.
-
Store partially charged: If storing for a while, keep the battery between 50% and 70% charged.
Battery-Saving Tips While Shooting:
-
Turn the camera off between shoots: Save battery by not leaving it on.
-
Limit flash use: The flash consumes extra power.
-
Shoot efficiently: Group your shots rather than powering on and off constantly.
📌 Tip: Muting the camera sounds can save a tiny bit of battery life, but for most users, the difference is barely noticeable. Choose whatever sound setting feels best for you.
Can You Replace the Camp Snap Battery?
The Camp Snap camera is equipped with a built-in, non-removable lithium-ion rechargeable battery.
The battery capacity is approximately 600mAh, which is enough for several hundred photos on a full charge.
While there are some online guides showing how to replace the battery, doing so is not recommended.
It can:
-
Break the camera’s weather seal
-
Void your warranty
-
Damage the camera and cause malfunctions
If you need more battery power while out shooting, the best options are:
-
Carry a portable USB power bank to recharge your Camp Snap when needed. A compact option like the Anker PowerCore 10000mAh (Here) offers plenty of backup power and easily fits into a pocket or backpack.
-
Purchase a second Camp Snap camera as a backup
These options let you stay ready without risking your camera.
Common Questions About Camp Snap Battery and Charging
Is it safe to leave the Camp Snap charging overnight?
It’s better to unplug it once fully charged to extend battery life.
Is it better to completely drain the battery before charging it again?
No — recharge when the battery drops to around 20–30% to maintain long-term performance.
Can I charge the Camp Snap with a power bank?
Yes! A portable USB power bank is a great way to charge while travelling or shooting outdoors.
Does cold weather affect the Camp Snap battery?
Yes, cold temperatures can temporarily reduce battery life. Keep the camera warm if possible.
Can you use the Camp Snap while charging?
No, the camera cannot be used while it’s plugged in and charging.
What happens if the battery dies while using the Camp Snap?
If the battery runs out, the camera will power off. You'll need to recharge before you can take more photos.
Does the camera switch off automatically?
Yes, it powers down after a period of inactivity to save battery life.
Final Thoughts
The Camp Snap is designed to be simple, fun, and easy to use — and that spirit extends to its charging and battery care as well. By following a few smart habits, like using a good-quality charger, avoiding full battery drains, and carrying a backup power source when needed, you’ll make sure your Camp Snap is always ready to capture the moment. Happy snapping!
Jakub Bors | Camp Snap Camera | Clever Photographer
Some of the links in this article are affiliate links. This helps support my work and allows me to keep creating helpful guides like this one — thank you!
